Product description
5G HAT for high-performance embedded platforms
The Teltonika Calyx 5G / EBD050 adds integrated 5G cellular connectivity to systems based on Raspberry Pi 4, Raspberry Pi 5, and Rubik Pi. Designed as a HAT+ expansion board, it targets embedded and integration tasks that require higher data throughput, external antenna connectivity, and direct host-level hardware integration.
Designed for host connection and compact system integration
The board provides a 40-pin GPIO header and a USB Type-C interface for integration into existing hardware designs. Power can be supplied either through USB Type-C or through the 40-pin header, supporting compact system layouts where the host platform, data path, and power design need to be tightly aligned.
5G Sub-6 connectivity with LTE and 3G support
The EBD050 variant supports 5G Sub-6 GHz in both SA and NSA operation and also includes 4G LTE Cat 19 and 3G support. This makes the board suitable for applications that require a broad cellular feature set with modern 5G capability directly on the host platform.
Technical integration with GPIO, USB, and external antennas
GPIO functions are available for modem PWR_KEY, wake-up, and reset control. The board also includes a 4FF Nano SIM slot, a PCM digital interface, four SMA connectors for mobile antennas, and status LEDs for power and network indication. With USB 3.0 and expanded antenna connectivity, the EBD050 variant is designed for performance-oriented embedded deployments.
Technical Specifications
- Manufacturer: Teltonika Networks
- Product: Calyx 5G / EBD050
- Product type: Embedded Cellular Raspberry Pi HAT+
- Host platforms: Raspberry Pi 4, Raspberry Pi 5, Rubik Pi
- Cellular standards: 5G NR SA/NSA, 4G LTE Cat 19, 3G
- Data rates: 5G Sub-6 GHz SA/NSA up to 2.4 Gbps DL / 900 Mbps UL and up to 3.4 Gbps DL / 550 Mbps UL; 4G LTE Cat 19 up to 1.6 Gbps DL / 200 Mbps UL; 3G up to 42 Mbps DL / 5.76 Mbps UL
- 3GPP Release: Release 16
- Power supply: USB Type-C 5 VDC or via 40-pin header with 5 VDC and 3.3 VDC
- USB: USB 3.0
- GPIO: 40-pin GPIO header
- GPIO modem control: PWR_KEY, modem wakeup, modem reset
- Modem wakeup logic: Digital Input, 0 to 3.3 V, active Low
- PCM: PCM digital interface, 0 to 3.3 V logic level
- SIM: 1x Nano SIM slot (4FF), push-pull
- Antenna connectors: 4x SMA for mobile
- Status LEDs: 1x Power, NET IND, NET STAT
- Dimensions (W x H x D): 56 x 23.11 x 100.8 mm
- Weight: 57 g
- Operating temperature: -40 °C to 75 °C
- Approvals: CE, UKCA, EAC, UCRF, FCC, ISED (IC), RCM, CB, WEEE
- Available versions: EMEA / APAC / Brazil and North America
- 5G bands EMEA/APAC/Brazil: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78
- 4G LTE-FDD EMEA/APAC/Brazil: B1, B3, B5, B7, B8, B20, B28, B32, B71
- 4G LTE-TDD EMEA/APAC/Brazil: B38, B40, B41, B42, B43
- 3G EMEA/APAC/Brazil: B1, B5, B8
- 5G bands North America: NSA n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78; SA n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78
- 4G LTE-FDD North America: B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66, B71
- 4G LTE-TDD North America: B38, B41, B42, B43, B48
- Standard package: Calyx, Quick Start Guide, PCB Connector, USB Type-C to USB Type-A cable, Fasteners Kit
- HS Code: 851762
- HTS: 8517.62.00
Application Areas
- 5G integration for Raspberry Pi and Rubik Pi based embedded systems.
- High-performance edge systems and embedded gateways with direct WAN connectivity.
- Industrial and automation solutions using GPIO-controlled modem logic.
- Telemetry, remote maintenance, and remote access applications with external antenna infrastructure.
- Compact system designs where 5G connectivity, host integration, and power input need to be combined directly on the carrier platform.
- Deployments with extended temperature requirements and higher bandwidth demand.
Technical Specifications
- Manufacturer: Teltonika Networks
- Product: Calyx 5G / EBD050
- Product type: Embedded Cellular Raspberry Pi HAT+
- Host platforms: Raspberry Pi 4, Raspberry Pi 5, Rubik Pi
- Cellular standards: 5G NR SA/NSA, 4G LTE Cat 19, 3G
- Data rates: 5G Sub-6 GHz SA/NSA up to 2.4 Gbps DL / 900 Mbps UL and up to 3.4 Gbps DL / 550 Mbps UL; 4G LTE Cat 19 up to 1.6 Gbps DL / 200 Mbps UL; 3G up to 42 Mbps DL / 5.76 Mbps UL
- 3GPP Release: Release 16
- Power supply: USB Type-C 5 VDC or via 40-pin header with 5 VDC and 3.3 VDC
- USB: USB 3.0
- GPIO: 40-pin GPIO header
- GPIO modem control: PWR_KEY, modem wakeup, modem reset
- Modem wakeup logic: Digital Input, 0 to 3.3 V, active Low
- PCM: PCM digital interface, 0 to 3.3 V logic level
- SIM: 1x Nano SIM slot (4FF), push-pull
- Antenna connectors: 4x SMA for mobile
- Status LEDs: 1x Power, NET IND, NET STAT
- Dimensions (W x H x D): 56 x 23.11 x 100.8 mm
- Weight: 57 g
- Operating temperature: -40 °C to 75 °C
- Approvals: CE, UKCA, EAC, UCRF, FCC, ISED (IC), RCM, CB, WEEE
- Available versions: EMEA / APAC / Brazil and North America
- 5G bands EMEA/APAC/Brazil: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78
- 4G LTE-FDD EMEA/APAC/Brazil: B1, B3, B5, B7, B8, B20, B28, B32, B71
- 4G LTE-TDD EMEA/APAC/Brazil: B38, B40, B41, B42, B43
- 3G EMEA/APAC/Brazil: B1, B5, B8
- 5G bands North America: NSA n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78; SA n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78
- 4G LTE-FDD North America: B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66, B71
- 4G LTE-TDD North America: B38, B41, B42, B43, B48
- Standard package: Calyx, Quick Start Guide, PCB Connector, USB Type-C to USB Type-A cable, Fasteners Kit
- HS Code: 851762
- HTS: 8517.62.00
FAQ
FAQ
Which host platforms are supported by the Calyx 5G / EBD050?
The HAT supports Raspberry Pi 4, Raspberry Pi 5, and Rubik Pi as host platforms.
Which cellular technologies are supported by the EBD050 variant?
The board supports 5G NR in SA and NSA operation, 4G LTE Cat 19, and 3G.
How is the board powered?
Power can be supplied through USB Type-C at 5 VDC or through the 40-pin header with 5 VDC and 3.3 VDC.
Which modem functions are available over GPIO?
GPIO access is provided for PWR_KEY, modem wake-up, and modem reset.
What SIM and antenna interfaces are available?
The board includes one 4FF Nano SIM slot and four SMA connectors for mobile antennas.
What distinguishes the EBD050 variant on the host side?
The EBD050 variant uses USB 3.0 and is designed for higher host-side data throughput.
Technical question? Talk to our FAEs.
Our Field Application Engineers support you with platform selection, integration and the path to series production – across manufacturers.
