5G router for industrial and distributed systems
The Teltonika RUTM30 is a compact 5G router designed for professional applications that combine cellular connectivity, local networking, and robust system integration in one device. It supports 5G Sub-6 GHz in both SA and NSA operation and extends this with 4G LTE and 3G. This makes the router suitable for deployments where modern mobile connectivity and broad network availability need to be combined.
Dual SIM, eSIM, and flexible carrier handling
With two Mini SIM slots and an integrated eSIM, the RUTM30 supports different carrier and backup strategies. Automatic SIM switching reacts to defined conditions such as weak signal, data limits, roaming, or connection failure. This fits distributed installations where uptime and flexible cellular provisioning are important.
Network integration with Wi-Fi, Gigabit Ethernet, and RutOS
For local connectivity, the router provides dual-band Wi-Fi 5 together with one Gigabit WAN port and one Gigabit LAN port. It runs RutOS and therefore offers a broad set of functions for routing, failover, load balancing, VPN, VLAN, firewalling, and remote management. This allows the RUTM30 to fit into both conventional IT networks and industrial communication environments.
I/O functionality for technical integration tasks
In addition to its networking functions, the device includes two configurable digital inputs and outputs on the 4-pin power connector. These are suitable for basic status or switching functions inside technical system designs. Combined with remote management, automation protocols, and external antenna connectivity, the router can be integrated into control, monitoring, and edge applications.
Mechanically designed for demanding environments
The anodized aluminium housing, IP30 rating, and extended operating temperature range support use in industrial and technically demanding environments. DIN rail, wall, and flat-surface mounting are supported with the appropriate additional kit.
Application Areas
- 5G connectivity for industrial equipment and distributed edge systems.
- IoT and IIoT deployments with dual SIM, eSIM, and failover requirements.
- Remote monitoring and remote service solutions with VPN and RMS integration.
- Technical applications that require digital I/O for basic status or switching functions.
- Mobile or fixed installations with external antennas and compact device dimensions.
- Network nodes for distributed infrastructures that combine Wi-Fi, Gigabit Ethernet, and cellular backhaul.
- Manufacturer: Teltonika Networks
- Product: RUTM30
- Product type: 5G router
- Cellular: 5G Sub-6 GHz SA/NSA, 4G LTE, 3G
- Mobile data rates: 5G up to 2.4/3.4 Gbps DL and 900/550 Mbps UL; 4G LTE Cat 19 up to 1.6 Gbps DL, Cat 18 up to 200 Mbps UL; 3G up to 42 Mbps DL / 5.76 Mbps UL
- 3GPP Release: Release 16
- SIM / eSIM: 2x Mini SIM (2FF) and 1x eSIM
- eSIM: Consumer-type eSIM, profile download and removal, up to 7 eSIM profiles
- SIM switching: Auto-switching for weak signal, data limit, SMS limit, roaming, no network, network denied, and connection failure cases
- Wi-Fi: 802.11b/g/n/ac Wave 2, dual band, MU-MIMO, up to 867 Mbps
- Wi-Fi features: AP, STA, 802.11r, 802.11k, 802.11v, 802.11s, Relayd
- Max simultaneous Wi-Fi users: up to 150
- Ethernet: 1x WAN 10/100/1000 Mbps, 1x LAN 10/100/1000 Mbps
- I/O: 2x configurable digital I/O on the 4-pin power connector
- Digital input: 0 - 6 V detected as logic low, 8 - 50 V detected as logic high
- Digital output: open collector, max. 30 V, 300 mA
- Power connector: 4-pin industrial DC power socket
- Input voltage range: 9 - 50 VDC
- Passive PoE: power-up through LAN port possible, Mode B, 9 - 50 VDC
- Power protection: reverse polarity protection and voltage surge/transient protection
- Power consumption: idle 3.9 W, max 9 W
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, WOL
- Routing: static routing, BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP, policy based routing
- Firewall / security: NAT, NAT-T, NAT64, DMZ, VLAN, DDoS prevention, port scan prevention, 802.1x, TPM 2.0, Let's Encrypt, SCEP
- VPN: OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, Tailscale
- Industrial / IoT protocols: MODBUS TCP, MQTT Gateway, OPC UA, DNP3, DLMS/COSEM
- Management: Web UI, FOTA, SSH, SMS, Call, Email, TR-069, MQTT, SNMP, JSON-RPC, MODBUS TCP, RMS
- IoT platforms: ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core
- Operating system: RutOS (OpenWrt-based)
- CPU: MediaTek dual-core, 880 MHz, MIPS1004Kc
- RAM: 256 MB DDR3
- Flash: 16 MB serial NOR flash, 256 MB serial NAND flash
- Antenna connectors: 4x SMA for mobile, 2x RP-SMA for Wi-Fi
- Status LEDs: 1x mobile connection type (RGB), 1x mobile signal strength (RGB), 4x LAN status, 1x power
- Reset: reboot / user default reset / factory reset button
- Housing: anodized aluminium housing
- Dimensions: 100 x 30 x 93.7 mm
- Weight: 319 g
- Mounting options: DIN rail, wall, flat surface (additional kit required)
- Operating temperature: -40 °C to 75 °C
- Operating humidity: 10% to 90% non-condensing
- Ingress protection: IP30
- Approvals: CE, UKCA, CB, EAC, UCRF, RCM, R-NZ, WEEE
- Available region / version: EMEA, APAC, Brazil
- Supported 5G bands: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n75, n76, n77, n78
- Supported 4G LTE-FDD bands: B1, B3, B5, B7, B8, B20, B28, B32, B71
- Supported 4G LTE-TDD bands: B38, B40, B41, B42, B43
- Supported 3G bands: B1, B5, B8
- Standard package: RUTM30 router, 18 W PSU, 4x 5G straight compact mobile antennas (SMA male), 2x Wi-Fi dual-band magnetic antennas, Ethernet cable (1.5 m), SIM adapter kit, 1x hex key, QSG, packaging box
- HS Code: 851762
- HTS: 8517.62.00
FAQ
Which cellular standards does the RUTM30 support?
The router supports 5G Sub-6 GHz in SA and NSA operation, with additional 4G LTE and 3G support.
How is the SIM configuration set up on the RUTM30?
The device includes two Mini SIM slots and one integrated eSIM. It supports automatic SIM switching and eSIM profile management with up to seven profiles.
Which local network interfaces are available?
The router provides one Gigabit WAN port, one Gigabit LAN port, and dual-band Wi-Fi 5.
Does the RUTM30 include I/O for technical integration tasks?
Yes. The device includes two configurable digital inputs and outputs on the 4-pin power connector.
Is the router suitable for industrial environments?
The RUTM30 operates from -40 °C to 75 °C, uses an aluminium housing, and supports DIN rail, wall, or flat-surface mounting.
Which power options are supported?
Power is supplied through a 4-pin DC connector with 9 to 50 VDC. Passive PoE power-up through the LAN port is also supported.
- Only suitable for technically experienced users who are familiar with the product.
- Only suitable for the intended use.
- Improper use can lead to damage and injury.
- Observe the manufacturer's further safety instructions.
Manufacturer
Teltonika Networks UAB
K. Barsausko str. 66
51436 Kaunas
Lithuania
https://teltonika-iot-group.com/
Responsible Person for the EU
Teltonika Networks UAB
K. Barsausko str. 66
51436 Kaunas
Lithuania
https://teltonika-iot-group.com/