Teltonika Networks – Official Distributor

• Embedded cellular HAT+ for Raspberry Pi 4, Raspberry Pi 5, and Rubik Pi host platforms.
• 4G LTE Cat 4 connectivity with fallback to 3G and 2G networks.
• 40-pin GPIO header and USB Type-C for power input, data connection, and system integration.
• GPIO-based control for PWR_KEY, modem wake-up, and modem reset.
• PCM digital interface with 0 to 3.3 V logic level and a 4FF Nano SIM slot.
• 2x SMA mobile antenna connectors, compact board format, and operating range from -40 °C to 75 °C.

Manufacturer: Teltonika Networks

• Embedded cellular HAT+ for Raspberry Pi 4, Raspberry Pi 5, and Rubik Pi host platforms.
• 5G Sub-6 GHz SA/NSA with additional 4G LTE and 3G support for high-performance cellular integration.
• 40-pin GPIO header and USB Type-C for host connection, power input, and system integration.
• GPIO-based control for PWR_KEY, modem wake-up, and modem reset.
• 4FF Nano SIM slot, PCM digital interface, and 4x SMA connectors for mobile antennas.
• USB 3.0, compact board format, and operating range from -40 °C to 75 °C.

Manufacturer: Teltonika Networks

• Embedded cellular HAT+ for Raspberry Pi 4, Raspberry Pi 5, and Rubik Pi host platforms.
• 5G RedCap with 5G NR SA plus 4G LTE support for compact cellular integration.
• 40-pin GPIO header and USB Type-C for power input, data connection, and embedded system integration.
• GPIO-based control for PWR_KEY, modem wake-up, and modem reset.
• PCM digital interface with 0 to 3.3 V logic level and a 4FF Nano SIM slot.
• 2x SMA mobile antenna connectors, compact board format, and operating range from -40 °C to 75 °C.

• Outdoor 4G router with LTE Cat 4 and fallback to 3G and 2G for external installations.
• Dual SIM with automatic SIM switching for flexible carrier and failover scenarios.
• 1x PoE In and 1x PoE Out for combined power and data delivery over Ethernet.
• IP55-rated enclosure with integrated antenna design for robust outdoor deployment.
• 2x 10/100 Mbps Ethernet ports, with configurable WAN usage.
• RutOS with VPN, firewall, VLAN, RMS, and support for industrial and IoT protocols.

• Concept: Cost-efficient RedCap 5G router for modern IoT and industrial applications with low latency and wireless device connectivity
• Configuration: RedCap 5G with SA architecture, Wi-Fi, 4G LTE Cat 4 fallback, WAN failover, and 2× 10/100 RJ45 in a compact industrial-grade design
• Use case: Suitable for IoT environments that require 5G connectivity, reliable fallback communication, and wireless access for multiple end devices
• Development focus: Cost-effective entry into 5G-enabled edge and IoT infrastructure between LTE and full-capacity 5G
• Design note: Validate SA network availability, Wi-Fi topology, failover strategy, and Ethernet integration against the target deployment before rollout

• Concept: Industrial cellular router for secure remote connectivity, network redundancy, and IoT or automation integration in field deployments
• Configuration: 4G LTE Cat 4 with 3G/2G fallback, dual SIM, Wi-Fi 4 access point, WAN failover, 4× Fast Ethernet, digital I/Os, and RutOS
• Use case: Suitable for industrial & automation, energy & utilities, enterprise, retail, and smart-city applications requiring high availability and secure remote access
• Development focus: Robust cellular connectivity, flexible VPN and routing architectures, protocol integration, and field-ready remote management on compact industrial hardware
• Design note: Align cellular region, SIM/eSIM version, antenna concept, power input, I/O usage, and VPN or management architecture with the target application before rollout

• Concept: Industrial RedCap 5G router for professional IoT, transportation, and infrastructure applications with low latency and broad interface integration
• Configuration: RedCap 5G with SA architecture, dual SIM with auto-failover, Wi-Fi, GNSS, 4G LTE Cat 4 fallback, 4× 10/100 RJ45, RS232, RS485, and digital I/Os
• Use case: Suitable for deployments with up to 100 wireless end devices where cellular connectivity, location data, serial communications, and robust fallback strategies must be combined
• Development focus: Cost-efficient entry into RedCap 5G infrastructure between LTE and conventional 5G for distributed professional field deployments
• Design note: Validate SA network availability, dual-SIM strategy, GNSS usage, serial integration, and I/O design against the target application before rollout

• Ultra-compact 5G router with a global Telit modem for IoT and IIoT deployments with limited installation space.
• 5G Sub-6 GHz SA/NSA with additional 4G LTE and 3G support for broad cellular coverage.
• Dual SIM and eSIM with auto-switching, remote profile handling, and failover functionality.
• Active PoE In and PoE Out to simplify power design and reduce cabling effort.
• Wi-Fi 5 dual band, 2x Gigabit Ethernet, and extensive routing, security, and VPN functionality.
• Robust aluminium housing, DIN rail/wall/flat mounting options, and an operating temperature range from -40 °C to 75 °C.

• Compact 5G router with 5G Sub-6 GHz SA/NSA, 4G LTE, and 3G for professional IoT and IIoT deployments.
• Dual SIM and eSIM with automatic SIM switching and remote profile management.
• Wi-Fi 5 dual band, 2x Gigabit Ethernet, and RutOS for flexible network integration.
• 2x configurable digital inputs and outputs via the 4-pin power connector.
• 4x SMA for mobile connectivity and 2x RP-SMA for Wi-Fi with external antennas.
• Aluminium housing, IP30 protection, and an operating temperature range from -40 °C to 75 °C.

• Industrial 5G router with 5G Sub-6 GHz SA/NSA, 4G LTE, and 3G for high-performance cellular connectivity.
• Dual SIM and eSIM with auto-switching for flexible carrier and failover strategies.
• 4x Gigabit Ethernet, dual-band Wi-Fi 5, USB 2.0, and GNSS for broad system integration.
• RS232, RS485, and extensive digital and analog I/O for technical applications and control tasks.
• RutOS with VPN, firewall, VLAN, remote management, and industrial or IoT protocol support.
• Aluminium housing, IP30 protection, and an operating temperature range from -40 °C to 75 °C for industrial environments.

• Managed PoE+ switch with 24x Gigabit RJ45 ports and 4x SFP uplinks for high-capacity network topologies.
• 12 PoE+ ports with up to 30 W per port and a 300 W total PoE budget for centralized device powering.
• L2+ and L3 functionality with VLAN, STP/RSTP, LACP, static IPv4/IPv6 routing, and dynamic routing support.
• Support for Profinet, MRP, and EtherNet/IP in industrial and mixed network environments.
• Cloud-enabled management with RMS, including 2 years of RMS Management.
• 19-inch rack form factor with aluminium housing, IP30 protection, and operating range from 0 °C to 50 °C.

• Managed Gigabit Ethernet switch with 24x RJ45 ports and 4x SFP uplinks for larger network topologies.
• L2+ and L3 functionality with VLAN, STP/RSTP, LACP, static IPv4/IPv6 routing, and dynamic routing support.
• Support for Profinet, MRP, and EtherNet/IP in industrial and mixed network environments.
• Cloud-enabled management with RMS, including 2 years of RMS Management.
• 19-inch rack form factor with aluminium housing for central network distribution.
• Suitable for enterprise, industrial, and infrastructure environments with an operating range from 0 °C to 50 °C.

• Managed PoE+ switch with 24x Gigabit RJ45 ports and 4x SFP uplinks for larger network topologies.
• PoE+ on ports 1 to 24 with up to 30 W per port and a total PoE budget of 300 W.
• L2+ and L3 functionality with VLAN, STP/RSTP, LACP, static IPv4/IPv6 routing, and dynamic routing support.
• Support for Profinet, MRP, and EtherNet/IP in mixed industrial networks.
• Cloud-enabled management with RMS, including 2 years of RMS Management.
• 19-inch rack form factor with aluminium housing, IP30 protection, and operating range from 0 °C to 50 °C.

The Teltonika RUTX50 is a powerful 5G industrial router (SA/NSA) delivering up to 3.3 Gbps downlink and 900 Mbps uplink. It features Dual-Band Wi-Fi 5 (up to 867 Mbps), 1× WAN + 4× LAN Gigabit Ethernet, GNSS, and a full VPN suite (WireGuard, IPsec, OpenVPN). With its IP30 aluminium housing, −40 °C to +75 °C temperature range, and 9–50 V DC input, it is ideal for industrial connectivity, SD-WAN, and remote access.

The Teltonika TSW210 is a rugged, fanless industrial switch with 8× 10/100/1000 Base-T (RJ45) and 2× SFP fibre uplink ports. It delivers 20 Gbps non-blocking throughput, jumbo frames up to 9216 bytes, and operates reliably between −40 °C and +75 °C. An IP30 aluminium housing, DIN rail or wall mounting, and a wide input voltage range of 7–57 V DC make it ideal for industrial networks.